|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » launch control » Post Reply
|
johnny27 |
posted on 10th Apr 06 at 11:54 |
lauch control on a rev limiter, has the exact same effect as traction control, like on the vectra | |
johnny27 |
posted on 10th Apr 06 at 11:12 |
i have a rev limter in my corsa with lauch control and full throttle gear change, and obivoulsy an adjustable rev limiter. It has to be wired to coil and the clutch. If i was using the lanch control i put the car out of gear, steady the throttle to rev at 3000rpm or so, hold in the lauch control when desired revs are achevied. Then you can let go of the launch control button and put your car in gear. When the lights go green, you take off in 1st gear, but it will not go passed you set revs, so it cuts power and dose'nt spin the wheels, when you are fully taken off and not spinning, you then hit the launch control button and drive as normal, up to your limiter. It does the job well at keeping traction off the line, plus when switching gears its extremely fast and handy, just keep your foot on the throttle when changing gear and clutch,. You see as soon as you press the clutch when changing, the rev limits to the same revs you are at when you put the clutch in, so it dose'nt rev out to top. BTW it sounds lovely with a good exhaust system, it sorta sound like an anti lag on mine, it splutters and chatters when changing gear | |
Shaun2005 |
posted on 10th Apr 06 at 10:38 |
is it worth it and how exactly does it work? | |
broster |
posted on 10th Apr 06 at 09:49 |
depends what system you hae, mine needed to be set up to the actual car, to make it slip the wheels a set amount etc. some work of abs sensors and the like, cut out after the wheels front and rear are travelling at the same speed | |
Rileysport |
posted on 10th Apr 06 at 09:47 |
how does it work :boggle: |