|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Powering 2 amps » Post Reply
|
mikeySR |
posted on 30th Mar 06 at 10:07 |
A 4guage main supply cable will suffice then. Run this to a fused distribution box, and then you can run either 4 or 8Ga from there to each amp. You need a 50A fuse within 18" of the battery, and two 25A fuses in the distribution box. Also connect the earths from both amp to the same ground point, make sure of good contact by removing the paint at the contact point. | |
woz9 |
posted on 29th Mar 06 at 20:57 |
Wrighty: cheers, any help is helpful, because i am clueless when it comes to this sort of thing, i have installed numerous amps, but never 2 | |
mikeySR |
posted on 29th Mar 06 at 20:31 |
What size cable do you have all ready? | |
Wrighty |
posted on 29th Mar 06 at 17:38 |
yea one of them 'splitters' should be fine,you will need a couple of lengths or power cable to run from the 'splitter' to the amps though | |
woz9 |
posted on 29th Mar 06 at 17:07 |
oh and do i need a bigger gauge power wire, if so, how big, i am hoping to run 2 400w amps, one bridge to my sub and the other to my 6x9's | |
woz9 |
posted on 29th Mar 06 at 16:51 |
Powering 2 amps |