|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » 2 litre driveshafts » Post Reply
|
alistairolsen |
posted on 17th Mar 06 at 17:52 |
Beardy, do you have both shafts from th cally on your car? what do you mean about modding the knuckle? | |
BeArDy |
posted on 17th Mar 06 at 16:59 |
i have Standard Equal length car shafts on my corsa, and my car is standard width before people say mine wider. | |
Aragorn |
posted on 17th Mar 06 at 16:40 |
ive had an equal length cav shaft and corsa gsi shaft with cav mk2 inner sat side by side on the floor and they were exactly the same length... | |
mitch2 |
posted on 17th Mar 06 at 16:01 |
So does anybody know the difference in length between equal length shafts and the after market shafts from say regal or courtney and can the original shafts be machined down? | |
mitch2 |
posted on 17th Mar 06 at 13:24 |
does anybody know the difference in length between the standard shafts and the conversion shafts. Also are they equal length. Will the shafts you are on about Legend work on the M tech hubs, cause that's what i am running at the mo. | |
Rileysport |
posted on 17th Mar 06 at 13:23 |
corsa GSi shafts and cavvy inners 75 quid | |
the_legend_of_yrag |
posted on 17th Mar 06 at 13:17 |
mtech conversion shafts - £200 iirc | |
mitch2 |
posted on 17th Mar 06 at 13:15 |
hwat shafts have you got and how much did they cost you? | |
Rileysport |
posted on 17th Mar 06 at 13:08 |
afraid not, you should really not be using cav shafts as far as i'm aware | |
mitch2 |
posted on 17th Mar 06 at 13:01 |
what can i do to fix it. The passenger one is fine. Is there any way of shortening the drivers side. | |
Rileysport |
posted on 17th Mar 06 at 12:57 |
shafts are too long | |
mitch2 |
posted on 17th Mar 06 at 12:56 |
I have equal length 2 litre drive shafts from a cav 2 litre redtop in my corsa. The problem is that the drive shaft on the drives side pushes the engine towards the passenger side. it only does it when i maually turn the brake disc on the drivers side, but only does it at a certain point when i turn the brake disc. Has anybody got any ideas? |