oh well he wants his new cd player in it and amps

remove body control module cover, feed wires through there.

however,one thing is scaring me here-an 06 corsa c, will use a high speed can radio system.

by removing this radio, you will add your customer to the ever growing amount of corsa c my 6.0< who are breaking down due to removal of CAN radio system!

Get a haynes manual, if they do them, not sure if max power would do one for a c or not?

tried looking in footwells, loads of plastic covers and can't find where any of the bolts are for them

look at the bulkhead from under the car jack it up look in the engine bay from underneath, or you can look under the footwells on each side.

underneath the car? or underneath the dash? underneath the dash is loads of plastic covers

cant you see any better from underneath?

theres loads of stuff in way on this new corsa, i'll check this week when i see my mate

you should find one fairly easily if you look across the bulkhead :)

Well thats where mine is but ine is a pre facelift.

I also know that they changed the wiring loom on the 55/06 models but i assume the wiring positioning is still the same

i just wasn't sure where the grommet was, i have been told its on the drivers side, and now you says its on the passenger side behind battery

Well on mine atleast (02) there was a gromit behind where the battery is.....

Maybe look there?

then the cable should come through behind the glove box ans drop down...

From there you can take off the door sill trim and run it in the plastic cable case then re-fit the trim

Hope that helps :)

its for a mate, never looked in a corsa c before, just don't wanna drill holes into an 06 plates bulkhead, its not like i don't know what i am doing, i have installed atleast 40 systems already

Surely you shouldnt take on jobs this basic if you cant do them? :S

anyone got any pics of where the grommet is????

and how do i get to it from inside the car because of all the plastic panels???

bttt

there is one in the footwell just behind the fuse Board if you open the bonnet and look under the windscreen on drivers ide you will see your engine loome going thru your bulk head into the footwell

i know its obvious but i can't find it, thats why i asked, where abouts is it??????

Thought it would be obvious to put it through an existing grommet?

theres a black rubber ring for the wiring to go thru between footwell and engine bay!

where can i put the amp power cable through the bulkhead from the engine bay on an 06 reg corsa c?????

i need to know asap, this is a customers car i have to have done for 10am saturday morning

[Edited on 04-03-2006 by woodwardsbodyshop]