|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » need comformation about a few things for a superchaged corsa. » Post Reply
|
schoey |
posted on 15th Feb 06 at 12:43 |
ahhhh gotya! :thumbs: | |
ainsley_brader |
posted on 14th Feb 06 at 20:57 |
only the inner shaft splines are differennt the outer cv splines are all the same so the shaft as a whole are all interchangeable although not all the same!! | |
schoey |
posted on 14th Feb 06 at 12:08 |
you sure ains? | |
superchaged corsa |
posted on 14th Feb 06 at 09:02 |
Yeah its karens old corsa. | |
ainsley_brader |
posted on 13th Feb 06 at 19:29 |
Any corsa shaft will fit | |
the_legend_of_yrag |
posted on 13th Feb 06 at 18:38 |
local motor factors sell driveshafts... | |
Adam_B |
posted on 13th Feb 06 at 17:33 |
is it karens old car? black one. | |
James R |
posted on 13th Feb 06 at 17:30 |
you'd need the mantzel or simialr to that as the plastic pipeing that is on the std inlet wouldn't like th eboost I suspect. | |
superchaged corsa |
posted on 13th Feb 06 at 17:24 |
so would i be able to hook up my supercharger to a standard gsi inlet manifold or would i need the manztel. | |
1.6Sport |
posted on 13th Feb 06 at 15:54 |
Manztel is an inlet manifold | |
superchaged corsa |
posted on 13th Feb 06 at 15:50 |
It is a Full Gsi conversion so guessing the box is a Gsi box. | |
Rileysport |
posted on 13th Feb 06 at 14:23 |
quote: wtf :boggle: | |
Corsa E-Tec |
posted on 13th Feb 06 at 14:22 |
the GSI is a little longer. | |
Rileysport |
posted on 13th Feb 06 at 13:52 |
What gearbox.... any corsa driveshaft/cv assemblies will go on a small block gearbox. Its only the inner end of the GSi shafts that differ in that they have 22 splines on them :thumbs: | |
Adam_B |
posted on 13th Feb 06 at 13:51 |
arnt all the corsa shaftes the same? if not im sure at least off any 1.4 16v or 1.6 16v will be the same. | |
superchaged corsa |
posted on 13th Feb 06 at 13:45 |
Hey all. |