|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » vectra twin horn wiring » Post Reply
|
a_j_mair |
posted on 13th Feb 06 at 10:11 |
ah yes get the idea. that will work no problems? i just wired it up to battery as was in a rush but need to rip out all wiring at the battery to tidy it up and hide as much as possibile :thumbs: cheers mate | |
craig8 |
posted on 12th Feb 06 at 14:34 |
crude drawing, but you'll get the idea i hope | |
Gregor |
posted on 12th Feb 06 at 14:15 |
I was recomended an omega one :thumbs: | |
a_j_mair |
posted on 12th Feb 06 at 14:11 |
would like this sorted today if possibile | |
a_j_mair |
posted on 12th Feb 06 at 11:37 |
igot one off a vectra yesterday. connected up the four wies coming from them, 2 to each side and all i get is a boop, kind of clicky noise, do i need a relay or a permant live feed :boggle: | |
craig8 |
posted on 10th Feb 06 at 14:04 |
mines came off a vectra, its two horns, instead of the single one on the corsa, easy enough to wire | |
a_j_mair |
posted on 10th Feb 06 at 13:30 |
can i see :o | |
Rileysport |
posted on 10th Feb 06 at 12:19 |
... ive got the horn | |
a_j_mair |
posted on 10th Feb 06 at 12:18 |
is it just plug and play, no relays etc required? | |
carnuts |
posted on 8th Feb 06 at 11:15 |
omega i think is louder and a bit deeper than a corsa | |
a_j_mair |
posted on 8th Feb 06 at 10:53 |
horn didnt work so i replaced it woth a horn bought at halfrauds. worked ok for a wee while then filled up with water and was generally pap and tempremental. |