corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » EGR valve wiring... » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Dave A

 posted on 19th Dec 05 at 20:12

black: ignition 12v+
black / white: goes to tps and map sensor
black / brown: to ecu
brown / blue: to ecu
brown: goes to an earth on the ecu (but uses a common earth with the tps and cts)

check continuity between the ecu and the wires on the plug, check its got a good earth and obviously 12v ign switched live. also check the earths on the cts and tps


Rob B

 posted on 19th Dec 05 at 11:42

Right as you know fitted a new EGR valve still coming up with the EGR is at fault :mad:

Whats the 5 pins for the wires then ? is one of them an earth that could not be connected or something ?

Rob