|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Whats the difference between..... » Post Reply
|
lee mitchell |
posted on 29th Sep 05 at 22:08 |
20xej went in cavs | |
Steve Smith |
posted on 29th Sep 05 at 17:02 |
Ed what is a 20XEJ ? I dont think that is correct. Should be 20XE or C20XE if redtop. | |
Sly_SRi |
posted on 29th Sep 05 at 06:50 |
I have the correct wiring loom for the engine but it has no harness to go onto the ecu, its been chopped off. So i brought another loom which i've now discovered is wrong....is there anyway to make it work using what i have?? | |
ed |
posted on 28th Sep 05 at 23:27 |
My 20XEJ has a Cossie head, Forged pistons, early type ECU with no Lambda sensor and doesn't use a catalytic convertor. | |
J100RSA |
posted on 28th Sep 05 at 22:26 |
the main difference was 93 spec engine it had | |
Sly_SRi |
posted on 28th Sep 05 at 18:49 |
hmm, i seem to be mix and matching on my engine, i have the early engine, but i have a late wiring loom with 4 pin coil pack and lambda sensor in the manifold. What easier to do....change the loom? or just buy the rest of the bits for a late engine? | |
Kiddy_Corsa |
posted on 28th Sep 05 at 18:44 |
mine does have a lambda sensor does that mean it doesnt need a cat for mot??? | |
AdamF |
posted on 28th Sep 05 at 18:42 |
and later ones had lambda too | |
Sly_SRi |
posted on 28th Sep 05 at 18:42 |
air mass meter? that the same as air flow meter? i thought that was the same...?? | |
Steve Smith |
posted on 28th Sep 05 at 18:39 |
air mass meter is different too | |
Sly_SRi |
posted on 28th Sep 05 at 18:23 |
The early c20xe and the later c20xe's |