|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » x16xe couldnt pull you foreskin » Post Reply
|
Dave A |
posted on 28th Sep 05 at 21:43 |
quad drive module= fooked ecu. | |
ShEp |
posted on 26th Sep 05 at 21:06 |
try a knock sensor, sometimes when these sensors fcuk up they throw up some mental random codes, i canna see ur ecu being fooked, | |
a_j_mair |
posted on 26th Sep 05 at 19:07 |
so we think my ecu will be fucked :( | |
bubble |
posted on 26th Sep 05 at 17:46 |
Knock control unit or quad drive module | |
5chaap2k |
posted on 26th Sep 05 at 17:41 |
post pictures on how u connected the vacuumpipe's | |
bubble |
posted on 26th Sep 05 at 17:01 |
quad driver module-ecu | |
a_j_mair |
posted on 26th Sep 05 at 12:25 |
it was at a garage a few months ago and the guy said he cleared all the codes from it and these 1s are back again, has been off road for last 4 months :| | |
Cybermonkey |
posted on 25th Sep 05 at 23:32 |
many of them could also be old codes that havent been removed | |
corsa_godfather |
posted on 25th Sep 05 at 22:25 |
cool,possibly the ecu then imo | |
a_j_mair |
posted on 25th Sep 05 at 21:51 |
these were all showing before i fitted the new inlet manifold :( :| | |
Ant |
posted on 25th Sep 05 at 21:50 |
i got no ecu lights after a reset when my lexmaul was fitted | |
corsa_godfather |
posted on 25th Sep 05 at 21:01 |
quote: where ive wrote LEXMAUL,is what they will prob be on for.because you chaned the inlet. you didnt change the cams at all did you? knock sensor is on the exhaust pulley im sure.have u wired all your vaccum pipes up correctly? think it could be ur ecu | |
a_j_mair |
posted on 25th Sep 05 at 20:39 |
it has been running ok never 100% tho. seems to be a never ending battle. might be easiest to take the engine out and refit the whole thing again :( :boggle: | |
Ant |
posted on 25th Sep 05 at 20:33 |
ecu or loom shaged?? this ever run right | |
a_j_mair |
posted on 25th Sep 05 at 20:04 |
where do i start :crying: | |
a_j_mair |
posted on 25th Sep 05 at 19:59 |
:( :mad: :lol: help me | |
Siberia |
posted on 25th Sep 05 at 19:57 |
hrm strange... acording them fault code there dont seem to be alot that is actually workign on your car:lol: | |
a_j_mair |
posted on 25th Sep 05 at 19:48 |
1-4-0-5 Exhaust Gas Re-circulation (EGR) valve | |
a_j_mair |
posted on 25th Sep 05 at 19:23 |
did the paper clip test the other day and came up with a big list, i will go and do one just now see what it comes up with :| | |
Siberia |
posted on 25th Sep 05 at 19:09 |
is the eml light still on? do the paperclip test... might narrow the problem down... | |
a_j_mair |
posted on 25th Sep 05 at 19:05 |
car was running ok, EM light was on but seemed not to bad until friday :( night, Car is running very lumpy and has no power :(, thought it might be the cat so i removed it and put my decat pipe back on (Cat was refitted for mot :|). I also fitted an EGR blanking plate, whilst the inlet was off i thot i might aswell fit my recently purchased lexmaul inlet :). reset the ecu but the car still runs like shit. :mad: :( |