|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » weird noise..... RUN OUT OF IDEAS... » Post Reply
|
Nic Barnes |
posted on 8th Jul 05 at 01:27 |
corsa808, nah, sure as hell didnt, lol | |
Rob H |
posted on 7th Jul 05 at 23:31 |
May sound silly, and Proberbly isnt the noise your on about, but try checking the grooves in the tyres for debris thta may be stuck in it. I know mine make a right racket if i get stonechips wedged betwen the grooves :lol:. | |
Dave A |
posted on 7th Jul 05 at 23:02 |
did you use spiggot rngs with the v6 brakes? | |
Nic Barnes |
posted on 7th Jul 05 at 20:11 |
corsa 808 - not really as the hole for the brake disc that thew wheel nut goes through si slightly larger than the wheel nut and even though my wheels are on tight, it did use to make a bizzare noise, stopped when i put that bolt back in. this was on v6 brakes btw | |
Andy GSi |
posted on 7th Jul 05 at 11:13 |
it doesnt do it on both sides, just the drivers! | |
Dave A |
posted on 7th Jul 05 at 08:44 |
take it to an mot station that uses rollers to check the brakes, get them to drive it slowly on the rollers and have a good listen. | |
mwg |
posted on 6th Jul 05 at 12:52 |
When I first put my valver brakes on the retaining clip was catching on the back of the spokes of the wheels and making a funny noise, it bugged me for ages then I found out what it was when I put new discs and pads on. Its stopped now so the retaining clip must not have been pushed in properly. Dunno if thats any help! | |
Andy GSi |
posted on 6th Jul 05 at 11:58 |
quote: yeah had car up on axel stands, so both wheels were off ground. had it and running, NO noise at all?? turned full lock and nothing! only happens when on the deck! so i thought suspension.....so took it off checked everything, and all fine! had 3 machanics look at it, and they r all puzzled!! :o need more ideas lad :lol: [Edited on 06-07-2005 by andysri] | |
Dave A |
posted on 6th Jul 05 at 10:36 |
quote: but that bolt/screw isnt needed as its only there to hold the disc in place while the car is on the flow line at the factory. as soon as the wheel is on and done up tight, the disc is pressed onto the hub, so it was probably your wheels that were loose??? | |
Nic Barnes |
posted on 5th Jul 05 at 22:36 |
have you changed the brakes for some other ones at all? | |
Dave A |
posted on 5th Jul 05 at 21:08 |
| |
schoey |
posted on 5th Jul 05 at 20:49 |
only other thing could be something to do with the pads | |
Andy GSi |
posted on 5th Jul 05 at 20:45 |
not bearing wheel doesnt move in any direction!!! | |
schoey |
posted on 4th Jul 05 at 12:03 |
have you had the inner arch covers off at all? could be that? | |
dan.payne |
posted on 4th Jul 05 at 11:56 |
bearing? | |
Andy GSi |
posted on 4th Jul 05 at 10:29 |
i will have a look at that! its like a stone in the brake pad, but its not! and sometimes its sounds like rubber catching on something! just cant find the problem. | |
glennpanton |
posted on 3rd Jul 05 at 20:24 |
check the backplatebehind the disk could be scraping the disk.what noise is it | |
Andy GSi |
posted on 3rd Jul 05 at 20:02 |
i have had this swoosing noise coming from my drivers wheel or around that area. these are the stuff i have checked:
|