|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » removing silencer on exhaust » Post Reply
|
drunkenfool |
posted on 18th Jun 05 at 01:09 |
if u want a nicer note then fit a bigger engine :P :lol: | |
Jas |
posted on 17th Jun 05 at 23:01 |
what engine u got will? | |
Will94 |
posted on 17th Jun 05 at 22:55 |
i put a straight thru supersprint centre section on mine then one of the new design cherry bombs at the back :) loud but i like the tone it gives, and the burble on overrun is always welcome! | |
langey |
posted on 16th Jun 05 at 17:53 |
quote: thats your age showing mav, its not too loud i bet :P | |
mav |
posted on 16th Jun 05 at 11:03 |
my 2.0 has a straight through exhaust no silencer/cat etc...very raspy when revs are up, nice rumble when idling and back firing when coming off throttle though :) | |
Stu_22 |
posted on 16th Jun 05 at 10:56 |
quote: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=38786&item=7981176721&rd=1&ssPageName=WDVW&tc=photo | |
Rob_Corsa |
posted on 15th Jun 05 at 20:35 |
I removed the center silencer on my saxo vts using a magnex straight through section and yes it made it louder but it also lost a noticable amount of low down torque due to the reduction in back-pressure. | |
Jas |
posted on 15th Jun 05 at 13:15 |
i cant find any stu... | |
Stu_22 |
posted on 15th Jun 05 at 10:54 |
yep there is some on ebay too at the moment | |
t_benn_1 |
posted on 15th Jun 05 at 08:57 |
quote: Is that for all corsa's? | |
Jas |
posted on 15th Jun 05 at 00:07 |
really? how long is the pipe then...im unsure which one it is... u got any links to show me please | |
Fad |
posted on 14th Jun 05 at 23:55 |
go Halfords they doo a sebring straight through pipe for £50 and its stainless. | |
Jas |
posted on 14th Jun 05 at 23:51 |
what pipe? i have and induction kit and a backbox... it sounds ok atm..but would like it a little bit louder | |
Mistamist |
posted on 14th Jun 05 at 23:48 |
when i had a 1.2 8v i cut my centre box out and put a straight pipe in there. made a bit of difference but not a lot. | |
Jas |
posted on 14th Jun 05 at 23:43 |
what about the center section..what do u do just replace it? how much do they cost? | |
Jas |
posted on 14th Jun 05 at 23:40 |
if i dont like the sound can i bodge it back on? :look: | |
Mistamist |
posted on 14th Jun 05 at 23:32 |
yeah just a few bolts. might be easier with an angle grinder. | |
Jas |
posted on 14th Jun 05 at 23:18 |
lol..... fad... | |
Fad |
posted on 14th Jun 05 at 22:55 |
^^^ :lol: | |
Mistamist |
posted on 14th Jun 05 at 22:51 |
remove the manifold, its not really needed, and will cater for your noise requirements. | |
Jas |
posted on 14th Jun 05 at 22:26 |
|