|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Little help needed » Post Reply
|
Dean |
posted on 20th May 05 at 10:45 |
Hi guys, Was having a mess around with the clock last night trying to figure out what was up. Well when i turn the clock towards the light outside i can just barely make out the time ect so it must be there bulbs? but where are the bulbs located? | |
Dean |
posted on 19th May 05 at 08:12 |
Think ill see if the bulbs have blown i dont like this cutting buisness lol | |
AdiSRI |
posted on 19th May 05 at 06:50 |
The one you need to vut is the laed that turns on the powered aerial. | |
Richie |
posted on 18th May 05 at 21:07 |
There are sometimes 2. One will be labelled remote and will just come out of the headunit as a single wire ready for amps ect, the other goes right back into the ISO block and supplies +12v to the mfd which shuts off the date. | |
Jake |
posted on 18th May 05 at 20:57 |
im i correct in saying the blue/blue-white wire is the remote? | |
Richie |
posted on 18th May 05 at 20:28 |
btw to get date back you need to cut either the blue/blue white wire in your headunit harness, or cut the grey/red wire at the back of your ISO Block. | |
Richie |
posted on 18th May 05 at 20:28 |
Something was damaged during installation then, or both bulbs have blown on the MFD display. | |
Dean |
posted on 18th May 05 at 20:25 |
I havnt cut anythink just changed the cd player | |
Jake |
posted on 18th May 05 at 18:52 |
^O/T what is there to do to get the date back up? | |
Richie |
posted on 18th May 05 at 18:22 |
If the clock isnt coming on then a wire that was needed was cut and shouldnt have been cut. | |
James@CCC |
posted on 18th May 05 at 18:17 |
nah thats for a pernament live so it has a memory. | |
chumbly_warner |
posted on 18th May 05 at 18:11 |
swap the red and the yellow 1s over | |
Dean |
posted on 18th May 05 at 15:04 |
Cant find anythink. What about these 2 wires? | |
Dan Lewis |
posted on 18th May 05 at 14:56 |
you swap two wires around behind the hu. do a search n u'll find the answer | |
Dean |
posted on 18th May 05 at 14:54 |
Hi guys, |