|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Wheel fitment » Post Reply
|
Joff |
posted on 19th May 05 at 13:01 |
Have a look at the POTN site http://www.potn.com | |
Corsa1600 |
posted on 19th May 05 at 12:52 |
cheers for that! will have a look at those! are there any particularly good sites for these wheels? | |
Joff |
posted on 19th May 05 at 12:48 |
Stick to wheel manufacturers like Team Dynamics and Boss as they make wheels in Vauxhall-friendly fitments. | |
Corsa1600 |
posted on 19th May 05 at 12:44 |
cheers for the replies! Think ill steer clear of them then! Are there any websites that give all the fitment specs too? The ones i can find only have wheels size like 6.5x16 on...are there any that tell everything about the wheels? Any help much appreciated...cheers | |
Rob_Corsa |
posted on 18th May 05 at 16:29 |
No mate, using a spacer would reduce the offset. The 49mm vauxhall offset makes the wheel sit further into the arch than a lower offset would. | |
Corsa1600 |
posted on 18th May 05 at 12:08 |
would putting a 3mm spacer kit on have the effect of turnng the et42 to et45? Would it solve the problems associateed with et42 wheels? | |
Corsa1600 |
posted on 17th May 05 at 22:28 |
ok..so if i were to go for 16" wheels with 195/45/16 tyres, what offset should i go for? | |
craig8 |
posted on 17th May 05 at 22:12 |
yes, if u lower it then there will be scrubbing, cut the arches back or go to somewhere experienced that can do it for u mate | |
Corsa1600 |
posted on 17th May 05 at 22:10 |
Cheers for the reply....with the et42 is there going to be any problem with scrubbing etc? if so i may look elsewhere! Most people seem to advise the higher 40's for the corsa! Is 42 too low? | |
R Lee |
posted on 17th May 05 at 22:00 |
4x 100 et 42 is your best bet. | |
Corsa1600 |
posted on 17th May 05 at 21:50 |
Hi, at the moment have a totally standard Corsa Sport 1.6 . I have found some wheels i like in a 16" form. The site says they come in fitment of 4x100 et38 and 4x100 et42. With 195/45/16 will these fit ok? Am i right in saying the ideal offset is around the 49 mark? Will the et42 be ok or will it cause some problems? |