10 minute job - but forst of all check its not gunged up at the bottom - the first tiem I thought mine had gone was just after I bought it - but the bottom of the waher bottle was full of Green gunge - cleaned it out and it worked fine

then the motor broke and its literally a 10 minute job to replace - only ball ache is it can be a bit tight so worth taking scuttle panel off - it comes off easy enough but getting it back on straight is a ball ache - not hard just fiddly

i got a spare motor if u wan it

deaed easy to replace

haynes - halfords
motor - halfords mght have one :thumbs: if they dont local motor factors can get you one

Probably the motor, mine went on my corsa!

Not expensive and piece of pish to replace!

Hi, my washers are not working...checked all the fuses and all are fine.

The wipers move but I cant hear the motor going at all to do their squirting thing

I'm thinking it might be a relay? Can someone with a 1.2 8v please put a photo up of their fusebox (and the relays above the fuses) to see I am missing one.

Or just tell me what ones should be there (probably easier)!!

Cant get hold of a bloody haines manual, lol!

Thanks lads :thumbs:

Chris