|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » install progress » Post Reply
|
AdiSRI |
posted on 25th May 05 at 23:43 |
quote: It does affect the draw, as the load drops the power ouput (on most amps) increases, and as such so does the current draw. Amps should list their current draws at different loads... E.G. My audison LRx 1.400 draws about 25A at 4 ohm, but 65+A at 1 ohm. | |
Dom |
posted on 25th May 05 at 23:04 |
quote: whats the impedance of the speakers go to do with the current draw of the amps?? :o standard corsa alt is 55Ah (i believe) and a 1.6 had a 75Ah (again, i believe) alt which fits fine, so i would go with something like that. Otherwise, you start going into custom alt's and stuff that isn't quite "off the shelf". But again, it all depends on how much power your system is going to take. And as for split charge systems, i would suggest that you consider it as you can then supply your amps with 13-14 odd volts, which equals more power etc etc. However, it does put more stress on your alternator, so again that would need upgrading ASAP. | |
Pop |
posted on 25th May 05 at 22:05 |
quote: hey... I've got a new optima yellowtop battery that I'mgoing to put on ebay next week ... maybe what ur after | |
loo_goblin |
posted on 25th May 05 at 21:16 |
no | |
Jake |
posted on 25th May 05 at 21:15 |
would you consider a split charge system? | |
loo_goblin |
posted on 25th May 05 at 21:11 |
well if ne1 has suggestions for new alternator and battery please suggest | |
Jake |
posted on 25th May 05 at 20:43 |
hmm, wouldnt that require the amp to draw out 90+ amps? sure the standard alternator is only 54? | |
loo_goblin |
posted on 25th May 05 at 20:40 |
one at 2x4ohm one at 2x2ohm | |
Jake |
posted on 25th May 05 at 20:08 |
better off doing, what ohms are you going to be running the amp(s) at? | |
loo_goblin |
posted on 25th May 05 at 20:00 |
atandard atm, but no of its hook up yet, probably goin to upgrade and mayb battery aswel | |
Jake |
posted on 25th May 05 at 19:55 |
wat alternator are you using? | |
loo_goblin |
posted on 25th May 05 at 19:46 |
primer and dusted in black to see where they need flattening | |
Korsa |
posted on 25th May 05 at 18:44 |
what finish are the pods in? | |
loo_goblin |
posted on 24th May 05 at 20:01 |
updated, door pods from customcorsa in and speakers mounted and nearly wired up, ran out of light | |
loo_goblin |
posted on 15th May 05 at 11:30 |
updated, in a bit of a mess | |
Richie |
posted on 8th May 05 at 22:12 |
:D i rock | |
loo_goblin |
posted on 8th May 05 at 21:18 |
quote: eyes like an eagle, yep it is 18mm, timber world only had that and 25mm and as my car is only a 1.2 8v i thought i would like to mover after wards. Yeah got 2 RE 8 inch subs going in and focal K2P's up front | |
Richie |
posted on 8th May 05 at 17:23 |
Looks like 18mm | |
blue_lew |
posted on 8th May 05 at 16:49 |
what thickness MDF is it? | |
Fear |
posted on 8th May 05 at 12:43 |
Looking good so far, long way to go yet :P | |
chumbly_warner |
posted on 8th May 05 at 10:33 |
looking good, the amps are nice. What subs have u got? | |
loo_goblin |
posted on 8th May 05 at 09:36 |
lol, nah, took longer choosing what size MDF i wanted in teimber world than cutting it out, my dad has some awesome power tools | |
blue_lew |
posted on 7th May 05 at 22:21 |
looking good, was it hard cutting the MDF to fit properly? | |
loo_goblin |
posted on 7th May 05 at 21:44 |
take a gander at my garage and i have a look at my progress so far, daily updates. |