cheer, thanks for the help

I rubbed the paint away where every i earthed it!

quote:

---

Originally posted by jakethesnake
or you could just sand some paint away on the shell, drill a pilot hole and screw down the earth that way

---

or you could just sand some paint away on the shell, drill a pilot hole and screw down the earth that way

lol, no need to lift seats out, lol, car is empty apart from a drivers seat atm.

laying wire is such a bitch

oh, i use the seat belt bolt. Lift up the rear seats(looks like u lifted up everything) and look for the bolt that holds down the seat belt clip - or watever its called

i meant as in where should i earth it, sorry should of made it a bit more clear

ideally it should be the same gauge as the powercable running down your car

yeah 2 amps, kool.

i was going to use the one on the right, but got confused by the left one.

other question, wat should i use as an earth i got a metre on 0awg for the earth

How many amps you running?

The one on the left is the battery one, goes as close as you can to the battery and is fused yes!

The one on the right is a fuseddistribution block, will split the batery cable fom the one cable to two cables which run of to the two different amp!

The round one looks like a non fused distribution block just splits the power down to run to your different amps!

Woudlnt need both, if your running 2 amps use the one on the right, more then use the midlle one!

Keep the cable from the distibution block to the amps as short as possible!

hey

wat distibution box is which?? guessing left is power fused, middle power distribution, and the right is fused but not really sure y