|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Induction kit, Red wire and Pipe...curious » Post Reply
|
daddysport |
posted on 20th Apr 05 at 13:52 |
cool cheers | |
PaulW |
posted on 20th Apr 05 at 13:42 |
no, as you dont have hot-air feed pipe on that engine... | |
daddysport |
posted on 20th Apr 05 at 13:39 |
i have a x16xe would i have had 1 | |
PaulW |
posted on 20th Apr 05 at 13:36 |
red wire from what I remember, is on C14NZ / C12NZ / C14SE... | |
daddysport |
posted on 20th Apr 05 at 13:30 |
wot engine do u have i dont remember a little red wire but if i have cut it off is that bad | |
Joff |
posted on 20th Apr 05 at 07:24 |
Put a screw and a larger washer into the end of the red pipe, then tuck it away. | |
RyeSt |
posted on 19th Apr 05 at 23:24 |
iirc you need to put a screw down the red wire (vaccum pipe) and the thicker pipe can be removed | |
Wallace |
posted on 19th Apr 05 at 23:06 |
Hey all, |