corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Cant get 2nd or 4th after xe convertion » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

lee mitchell

 posted on 16th Apr 05 at 20:00

/\/\/\ as adam says it fails the rack. take of the likage and the arm that if fouling the rack is bet slightly back towards the rack. get a hammer and straighten it out. this will sort it


AdamF

 posted on 16th Apr 05 at 18:59

get some one to do the gears while you look whats going on. the linkage bends slightly towards the rack so the likely hood is when you pull it back to engage 2nd the linkge fouls the rack and wont go all the way back.

it also could be the clutch cable getting in the way. i had this problem on mine make sure the cable is hooked on the bracket out of th way.


Twiggy

 posted on 16th Apr 05 at 18:44

I bought a quick shift from LMF and that does the job, sounds like its touching some thing as its a on one side of the gears??:o


miles

 posted on 16th Apr 05 at 18:44

You need to adjust the linkage. Check haynes, for the procedure with a 4.5mm drill bit.


notts_v6

 posted on 16th Apr 05 at 17:59

Hi
I have just done the c20xe convertion in my 1.2 corsa and i cant get 2nd or 4th gear i can only get reverse, 1st, 3rd and 5th.
I have welded 15mm into the linkage and the bar, plus i have gear box spacers...
I dont want to get rid of the spacers and i know it can be done with them still in so please help as i wanna good spin in it tomorrow. :thumbs:

Dan