|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » FAO COSSVAUX 2.0 HUB fitters - what bearing torque have you gone for? » Post Reply
|
ainsley_brader |
posted on 14th Apr 05 at 18:01 |
quote: Are you sure thats for front wheel bearings? If so i'm not suprised you knocking hubs out! I'd be looking at more like 100-120 Nm. As I said you will not overtighten that front wheel bearing unless you snap the drive shaft in half. Ainsley | |
JJ |
posted on 14th Apr 05 at 12:41 |
;) | |
James R |
posted on 14th Apr 05 at 12:35 |
quote: That's the most productive thing you have to say:lol::lol: You're right, should stop offering any technical help:thumbs: | |
JJ |
posted on 14th Apr 05 at 11:31 |
quote: :o Think you should learn how to type properly. :) | |
Siberia |
posted on 14th Apr 05 at 11:26 |
just use an air rachet....:lol: | |
James R |
posted on 14th Apr 05 at 11:17 |
Think you shoudl invest in som egood calipers and do some measuring. | |
TOMAS |
posted on 14th Apr 05 at 10:37 |
Yes lock em down hard, then off then it was something like 20Nm, and two angulations (cant remember though). Bloody things... | |
James R |
posted on 14th Apr 05 at 08:29 |
Have you measured the hubs and bearing inner face to see how close the fit is?? All well and good buying off the shelf hubs, as long as they are pressed in correctly in the first place and you do them up as per haynes then you should be fine, it might be worth doing them, then going round the block and then checkign them again? | |
Siberia |
posted on 14th Apr 05 at 07:07 |
a mate of mine had the same problem... the car was eating wheel barings | |
ainsley_brader |
posted on 13th Apr 05 at 19:53 |
i agree torque them taf!! | |
DutchNovaDiesel |
posted on 13th Apr 05 at 19:43 |
Last time i changed hubs (bearing problem) i asked a vauxhall mechanic, | |
TOMAS |
posted on 13th Apr 05 at 19:25 |
Those of you out there who have fitted your own cossvaux hubs, how tight have you torqued them and how many miles have you done on them? |