corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » c20xe fault codes » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

J da Silva

 posted on 10th Apr 05 at 21:52

quote:
Originally posted by t-gangsta
thanks, i will have to check the fuel tank valve/ fuel pump. any advice on how to check it?

i still don't understand why the hall sensor is showing up when i don't have one?


tricky one if your unsure, but take ya fuel tank out or position, do this with very little fuel in the tank though, remove fuel cap ,disconnect fuel filter, undo the tray and disconnect the hose to the funnel, should see it unless you can see it from under the car (if dabbled with)


Tom N

 posted on 10th Apr 05 at 21:38

thanks, i will have to check the fuel tank valve/ fuel pump. any advice on how to check it?

i still don't understand why the hall sensor is showing up when i don't have one?


J da Silva

 posted on 10th Apr 05 at 21:28

93 - hall sensor voltage low - check connection, may need a clean or replacement
61 - EVAP canister purge solenoid valve voltage low - lack of electrical surge to the fuel tank vent valve haev a look at the connection
31 - engine speed sensor - ignore it, if the engine is running lumpy or pants 31 always pops up, when the other faults are corrected, it wont show up mate


Kerry

 posted on 10th Apr 05 at 21:15

the canister purge thingy is something to do with fuel like the fuel pump i do beleive


Tom N

 posted on 10th Apr 05 at 20:53

Hi

My car is running rather strange at the minute. It misfires sometimes and sometimes not. The idling is quite high even though i have got a new (secondhand) icv.

It is throwing up these codes

93 - hall sensor voltage low
61 - EVAP canister purge solenoid valve voltage low
31 - engine speed sensor

First of all the engine is a dis pack engine, so as far as i know, it doesnt have a hall sensor?

Plus, what on earth is an EVAP canister?!

Any help on all the codes would be much appreciated!

Thanks
:thumbs:
Tom