|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » adjustable fuel pressure regulator....how 2 fit? » Post Reply
|
James R |
posted on 11th Apr 05 at 18:38 |
SBD sell the pressure gauge whihc just screws in the blanked off plug in th eback for £16 | |
CORSA1.616V |
posted on 11th Apr 05 at 16:14 |
Just fitted one to mine. You need to take the old fuel regulator out which is attached to the fuel rail under the inlet manifold. put the new connector in then put a pipe from that to the fuel in on the FSE valve. Then a pipe from the fuel out, this connects to the fuel return pipe which you've just disconnected from the old regulator. then put your vacum hose from your manifold to the top of the FSE. then it's a case of fine tuning the valve. Hope that helps. | |
CRB 553 |
posted on 9th Apr 05 at 23:21 |
u need the gauge to set it to the correct pressure for your application. | |
ed |
posted on 9th Apr 05 at 22:54 |
Yes... So long as it is the same as most FPR's... You not got instructions? Also a good idea to get an under bonnet pressure gauge too for fine tuning... | |
Dave A |
posted on 9th Apr 05 at 21:39 |
bought one a while back, my engine build is nearly done now (x16xe with hopefully 150+bhp!) |