|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » SERVO PIPE CONNECTING TO C20XE. » Post Reply
|
Mistamist |
posted on 5th Apr 05 at 21:23 |
cut the L bend off and also cut the plastic from the metal coupling at the end then clean up the end of the hose and heat it slightly and push the coupling back inside. make sure its a tight fit, job done :D | |
starkie |
posted on 5th Apr 05 at 21:20 |
peugeots use rubber vacum hose thats what i use | |
AdamF |
posted on 5th Apr 05 at 20:23 |
i made a new one from 8mm fuel hose and used the old ends from the servo pipe an jubilee clips | |
notts_v6 |
posted on 5th Apr 05 at 19:15 |
Up | |
notts_v6 |
posted on 5th Apr 05 at 17:39 |
THE SERVO PIPE WONT CONNECT TO MY 20XE FROM MY 1.2 8V CORSA. |