|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Help needed: Removing bottom ball joint to change CV joint » Post Reply
|
X 60RSA |
posted on 18th Mar 05 at 18:52 |
I need to do this, my CV boot has split in 2 and spreading grease everywhere, this might explain the banging on my front right, probably fcucked the CV joint completely and its not just a case of a new boot :rolleyes: | |
carnoisseurcraig |
posted on 18th Mar 05 at 18:51 |
now thats what i was trying to say... LOL | |
Mistamist |
posted on 18th Mar 05 at 18:50 |
right what you should do is: | |
carnoisseurcraig |
posted on 18th Mar 05 at 18:43 |
lol, sorry mate. i see what you were thinking. my explanations are shoot. | |
myke |
posted on 18th Mar 05 at 18:34 |
thought you meant undo the rod end off the rod. | |
carnoisseurcraig |
posted on 18th Mar 05 at 18:33 |
quote: course he will.... its only a 13mm nut. apply pressure to the nut and undo it.. will give you that little bit of movement to get the shaft out... failing that if you want the ball joing off. hammer a chisel into split, make it wider then hammer the ball joint downwards. that should free it. | |
myke |
posted on 18th Mar 05 at 18:33 |
| |
myke |
posted on 18th Mar 05 at 18:24 |
he wont be able to undo the track rod end with the ball joint still attached will he? | |
carnoisseurcraig |
posted on 18th Mar 05 at 18:06 |
when i took my shafts out all i did was removed the 2 19mm bolts that the tie bar is attached to and pulled the shaft from the box the slid the cv out. If ur stil struggling undo the track rod end..... | |
Matt H |
posted on 18th Mar 05 at 18:01 |
Hi peeps. |