|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Washer jet pump!!! New jets and silicone hoses but the blockage seems to be in the pump - MOT NXT WE » Post Reply
|
ryansss |
posted on 6th Mar 05 at 16:59 |
Thanks people. I took it apart today, and it was indeed full of crap. Working fine now, just in time for its MOT. | |
TOMAS |
posted on 5th Mar 05 at 09:28 |
Remove the washer bottle - 1 x 10mm nut and then pull off the motor. Prise out the rubber bung with a screwdriver or something similar. Clean it thoroughly with a nail brush etc to all the tiny holes are nice and clean. What washer fluid are you using? I used to use Halfords but have found that it ALWAYS congeals in the bottle and blocks up the rubber bung etc... | |
AdamF |
posted on 4th Mar 05 at 17:59 |
wipe it off run it under a tap | |
ryansss |
posted on 4th Mar 05 at 01:09 |
No the water dont pour out, just sits there. Whats the easiest way of unblocking those holes? thanks | |
AdamF |
posted on 3rd Mar 05 at 18:13 |
when you take the pump out does the water pour out of the bottle? | |
ryansss |
posted on 3rd Mar 05 at 11:41 |
|