|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Rev counter » Post Reply
|
Siberia |
posted on 3rd Mar 05 at 08:33 |
so did my 1.2 merit... it was just a case of out with the old clocks in with the new... | |
dan.payne |
posted on 2nd Mar 05 at 23:33 |
My merit/swing already had the pea green wire on the plug at the top. so it was a straight swap. | |
Will94 |
posted on 2nd Mar 05 at 23:08 |
if its a 1.4 then the wiring will already be there, jus get the right speedo drive (cable or electronic) and it'll b plug & play. If its a 1.2 then you will need to run a wire down to the green one in the 9-way multiplug near the ECU and connect this up to the relevant pin at the speedo/rev counter end. | |
andrewww1 |
posted on 2nd Mar 05 at 13:37 |
cheers for the advice | |
Rileysport |
posted on 2nd Mar 05 at 13:33 |
the wire is usually taped up if it doesnt swap straight over | |
andrewww1 |
posted on 2nd Mar 05 at 13:28 |
how comes some are different? is it easy to add a new wire? | |
Rileysport |
posted on 2nd Mar 05 at 13:27 |
it may just be a straight swap... unplug old... plug in new, some peoples are some aren't | |
andrewww1 |
posted on 2nd Mar 05 at 13:26 |
my corsa b 1993 lf only has a speo and i am looking to add a rev counter as well by buying a new panel. |