|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » wheres the idle control valve on an X16XE? » Post Reply
|
Joff |
posted on 18th Feb 05 at 08:07 |
Halfords do a small ratchet spanner set with special Torx bits that fit snugly into the spanner. Remember the screws should be loctite'd so you'll need to crack them before they'll come loose. | |
1600power |
posted on 18th Feb 05 at 00:00 |
well u werent joking about its fiddleness, had to drop my coolant, and still couldnt get into the tiny space to remove the little screws..... shall be popping into Halfords 2moz to buy some torx bits on allen keys to get into the tight gap! | |
Dave A |
posted on 17th Feb 05 at 19:59 |
its fitted onto the throttle body, nightmare to get at and take off! it took me about an hour to get mine off a while back, then about two to get it back on. verry fiddly :mad: | |
PaulW |
posted on 17th Feb 05 at 18:49 |
complete arse to get too :| | |
Corsa Sport Gav |
posted on 17th Feb 05 at 18:24 |
its beside the throttle bodie, under the inlet manifold | |
1600power |
posted on 17th Feb 05 at 18:10 |
wheres the idle control valve on an X16XE? |