|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » ice setup » Post Reply
|
combatprojex |
posted on 17th Jan 05 at 18:51 |
ok mate thanks for ya help :thumbs: | |
AdiSRI |
posted on 17th Jan 05 at 18:49 |
no big 3 is the problem, i changed my wire from 4 to 0 gauge and it has made the dimming worse. Get the big 3 sorted. | |
combatprojex |
posted on 17th Jan 05 at 18:38 |
:! really! | |
AdiSRI |
posted on 16th Jan 05 at 22:30 |
im going to be fitting 0 gauge for the big 3 (only cause i have a load left) hoping that the alternator etc.. will allow for cable that large! | |
corsacman |
posted on 16th Jan 05 at 20:35 |
quote: Correct. Upgrade using some 2 gauge wire, phone a local welding shop and get some 35mm squared copper welding cable, shouldn't be any more than £3 p/m. You will also need 6 ring connectors. What size of cable have you got going to your amps. | |
combatprojex |
posted on 16th Jan 05 at 19:41 |
so basically change the wiring? | |
AdiSRI |
posted on 16th Jan 05 at 18:19 |
all spot on advice that, big 3 is the necxt thing being changed on mine.. | |
corsacman |
posted on 16th Jan 05 at 17:09 |
As for the lights dimming take your capacitor out. It adds more strain to the electrical system, First upgrade the Big 3, this is the battery (-) to chassis. Engine to chassis and Alternator + to Battery +. Use 2 gauge cable, i would recommend welding cable at around £3 p/m. And if the dimming still exists get the biggest battery you can afford and will fit. The capacity off the boxes should be around 1 cubic feet for the alpines iirc. Look on the net and it will tell you. | |
combatprojex |
posted on 16th Jan 05 at 15:33 |
i have 2 alpine type r 10" subs with a 3000w legacy amp and a 1.5farad power cap, but when i turn my system up my lights dim alot, what can i do to stop this? also some times my headunit just cuts out when the volume is up? |