corsasport.co.uk
 

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » engine management readouts » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

DJP

posted on 28th Dec 04 at 17:40

changed the sensor today and reset the ecu... all sorted as far as i can see... (fingers crossed..!)

ps... managed to fit central locking whilst resetting the ecu...!


DJP

posted on 27th Dec 04 at 18:29

the one in the radiator is the fan switch ;)


Mattb

posted on 27th Dec 04 at 18:22

coolant temp sensor is in the radiator.. as you look at the car its on the left side, at the bottom.. 22mm spanner to undo it :)


DJP

posted on 27th Dec 04 at 15:55

connection looked fine... so it looks like i'm off to vaux tomorrow..! yay!


Richie

posted on 27th Dec 04 at 12:20

check the connection, if connection looks ok then replace the sensor


DJP

posted on 27th Dec 04 at 10:38

oh, by the way... what would your recommendations be for me to do with said sensor if i find it? ha ha ha...


Corsa^Dan

posted on 26th Dec 04 at 18:28

hmm ines on the left


DJP

posted on 26th Dec 04 at 17:21

that's what i thought... couldn't find it for sh*t... gonna have a look again (read as: properly) tomorrow hopefully somewhere willll be open as well if i need a new one...


corsa_jim

posted on 26th Dec 04 at 15:06

should hav a 2 pin plug on it with a wire clip mate


DJP

posted on 26th Dec 04 at 13:52

um... had a look... and on the inlet manifold on the right side behind the bulk there is something connected... but it doesn't look like the description i've been given on here... it doesn't seem to have a connector... just a thick line coming from it... i'm confused...


DJP

posted on 26th Dec 04 at 13:35

thought so...! i'll go and have a look now!


corsa_jim

posted on 26th Dec 04 at 13:33

right hand rear side of the inlet maniforld mate the sensor your on about only works your gauge :thumbs:

Jim


DJP

posted on 26th Dec 04 at 13:25

right, i've got code 14 (Coolant Temperature Sensor - Low Voltage)

i haven't got my haynes manual with me as i'm at my folks... the coolant temperature sensor is the diddy thing in the manifold behind the bulk, right?

i checked the connection, i cleaned it and made it tighter, but i'm still getting the same readout...

anybody know what i'm doing or where i'm going wrong?

cheers!


DJP

posted on 25th Dec 04 at 23:16

ta! i'll give that a go tomorrow!


James_DT

posted on 25th Dec 04 at 19:13

http://www.corsasport.co.uk/board/viewthread.php?tid=101080


DJP

posted on 25th Dec 04 at 15:32

i know this is an old question, but the search isn't coming up with the goods...

i've got a 1.2 8v... been having a little trouble with damp but i seem to have sorted that. last night i didn't see a speedbump in the road and hit it at about 15 - 20 mph... ouch... since then... i've got the engine management light on when the engine's running...

it's a little sluggish, but seems to be firing on everything fine...

any ideas or information on how i can do a readout from the ecu by getting the light to flash etc?


cheers!