|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Capacity increase in a 1.4XE » Post Reply
|
Jambo |
posted on 28th Dec 04 at 02:26 |
why not buy a 1.8? Did they make an astra mk3 1.8? | |
ffls |
posted on 27th Dec 04 at 18:20 |
It will work with standard chip 1.4 should give 12 to 16 bhp and more torque would say 145 to 150 nm:) | |
shorty235 |
posted on 22nd Dec 04 at 14:06 |
if increasing from 1.4 to 1.6. is this an easy job. | |
shorty235 |
posted on 22nd Dec 04 at 13:58 |
the part number for 1.6xe crank shaft is 90509841 | |
ffls |
posted on 21st Dec 04 at 19:16 |
Miles and J1400 more suggesions please:wave: | |
ffls |
posted on 21st Dec 04 at 15:44 |
The X18XE is based on the big block engine family. (2.0 ecotec but smaller bore 81.6mm instead of 86mm) | |
ffls |
posted on 21st Dec 04 at 09:28 |
I think Miles is right because they charge 3000 euros:mad: | |
James R |
posted on 20th Dec 04 at 23:54 |
The 1.4 and 1/6 have different crank and rods. the 1.6 has a longer stroke. | |
miles |
posted on 20th Dec 04 at 18:30 |
You cant rebore them that much. | |
modded_corsa |
posted on 20th Dec 04 at 18:07 |
it is reccomended that you do not increase the cylinder capacity by no more then 200cc.......(50cc per cylinder..) | |
ffls |
posted on 20th Dec 04 at 17:40 |
Engine gurus.Ideas? | |
ffls |
posted on 20th Dec 04 at 15:12 |
But they can get 1.8 from these engines. | |
Rileysport |
posted on 20th Dec 04 at 13:07 |
u dont get 1.8 | |
ffls |
posted on 20th Dec 04 at 11:54 |
I lads, |