|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » MFD Date display... which wire to cut? » Post Reply
|
PaulW |
posted on 30th Nov 04 at 14:27 |
nah I just couldnt be arsed fiddlin so I cut it :| | |
j0hn |
posted on 30th Nov 04 at 14:04 |
confusing. If u hav a SOny player u can just press AF whilst radio on and it comes on | |
Dom |
posted on 30th Nov 04 at 13:52 |
quote: i take it, you dont have a bullet connector one the blue remote lead? but yea, the black/white one is the radio booster power :thumbs: | |
PaulW |
posted on 30th Nov 04 at 12:29 |
well I cut the blue wire in the adaptor lead for now & radio signal doesnt seem to be affected - mind, its good reception here... | |
Richie |
posted on 30th Nov 04 at 08:06 |
:lol: | |
John |
posted on 30th Nov 04 at 01:31 |
but a bit of tape over the remote aerial pin on the connector. None of this cutting wires. | |
Mistamist |
posted on 29th Nov 04 at 23:49 |
like i said cut the blue wire. | |
waynep |
posted on 29th Nov 04 at 23:48 |
msn | |
Mistamist |
posted on 29th Nov 04 at 23:42 |
quote: can you tell me why not? if the wire is connected to an amp or such then just cut after the connection. i have done this with every stereo i have had, and when i sell it on i just join it back up. | |
Dom |
posted on 29th Nov 04 at 23:11 |
unplug the remotelead from the loom if you have bullet connectors on your HU :) that the easiest and what i did, and saves cutting anything and can be put back together etc etc :) | |
waynep |
posted on 29th Nov 04 at 23:07 |
quote: NO ! :lol: | |
Mistamist |
posted on 29th Nov 04 at 22:45 |
cut the blue remote wire on the loom coming from the back of the radio, dont cut cars wiring loom. | |
eskiboy |
posted on 29th Nov 04 at 22:37 |
remember somethink bout a grey and red striped wire, never looked though??? | |
PaulW |
posted on 29th Nov 04 at 22:21 |
i'm sat at liverpool airport at the moment waiting for my girlfriend to get back from paris, and have my trusty wire cutters to hand... |