|
|
|
Not logged in [Login - Register] |
 |
You Are Not Registered Or Not Logged In |
|  |
|
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » How the F**K you get front arches off! » Post Reply
|
| Daniel_Corsa |
posted on 28th Nov 04 at 00:03 |
found an even better way............ undo one in bumper then pull on arch till it endsa up in your hands works a treat, then good old tiger seal to stick new ones on :D | |
| messham11 |
posted on 27th Nov 04 at 18:01 |
there are about 5/6 clips about 1cm in diameter in the lining, push the centre of them through then they cum out. Think theres also 1 arch bolt you can get to that you have to undo and 1 on the bumper also. then rip em out!! Hope that helps. | |
| Tom J |
posted on 27th Nov 04 at 11:39 |
theres just a small circular opening which you just unclip to undo the bolt | |
| greengoddess |
posted on 27th Nov 04 at 11:19 |
i want to know this also as the haynes manual is crap and doesn't show u what u have to undo, or where abouts the bolt or clips are located.:mad: | |
| Daniel_Corsa |
posted on 26th Nov 04 at 22:00 |
Been sticking new bumper and arches on tonight, everything is done apart from the front arches how do you get the wheel lining out to get to the bolts for the arch? |