|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Rattling Inlet Manifold?? » Post Reply
|
Rileysport |
posted on 29th Nov 04 at 12:36 |
... and the upper inlet on the x16 has a vacuum take off for the map sensor :thumbs: | |
Greasemonkey |
posted on 29th Nov 04 at 12:35 |
the difference is the X16XE lower inlet has EGR ports and stuff which will need blanking off, also the way the upper and lower halfes are joined is different | |
PaulW |
posted on 29th Nov 04 at 12:32 |
i thought it was slightly different cos of the AFM on the C16XE... :boggle: | |
broster |
posted on 29th Nov 04 at 12:22 |
yes they were mate, u will need to change upper and lower inlet..... | |
MoNkEy MaGiC |
posted on 29th Nov 04 at 12:22 |
yeh i know mate, cant really be bothered, rather spend the money on somthing else for the car... :thumbs: | |
broster |
posted on 29th Nov 04 at 11:21 |
to be honest mate it aint really worth the hassle, its not doing any harm | |
PaulW |
posted on 29th Nov 04 at 11:20 |
'dont' think you can use the upper & lower manifolds from an ecotec. | |
MoNkEy MaGiC |
posted on 29th Nov 04 at 11:17 |
yeah i took the heat sheild of when i first got the car! | |
Adam-D |
posted on 29th Nov 04 at 08:47 |
also cut the heat shield off the down pipe they can rattle | |
Joff |
posted on 28th Nov 04 at 23:52 |
Then don't open the bonnet? :boggle: | |
MoNkEy MaGiC |
posted on 28th Nov 04 at 21:03 |
nah can ONLY hear it if bonnet is open | |
Joff |
posted on 27th Nov 04 at 10:45 |
Quality GSi :lol: and people still insist they're a much better engine than the X16XE :|:| | |
broster |
posted on 26th Nov 04 at 19:19 |
its the plastic inlet mate, they all d oit | |
MoNkEy MaGiC |
posted on 26th Nov 04 at 19:11 |
when the bonnet is open i can hear this nasty rattle from the inlet manifold area when revving the engine hard??? |