corsasport.co.uk
 

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » one rear drum locks on.... » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Richie

posted on 22nd Nov 04 at 09:30

take the lip off the inside of the drum and replace the springs. Also check the adjuster fork


Siberia

posted on 22nd Nov 04 at 08:12

ugh.. rear brakes are messy bastids to work on the pages of my haynes thats the rear brakes atre on are stuck together with grease :lol:

its probably a spring after coming off....


AdiSRI

posted on 22nd Nov 04 at 00:09

um well not really the rear axle was changed and the brake line on that side wasnt done up properly and so leaked...

this was noticed and fixed at MOT a couple of months ago and its been getting dodgy in last month or so but no changes since the MOT


Stone Cold Rattlesnake

posted on 22nd Nov 04 at 00:01

has something been changed in the brakes recently? i remember when i had a few bits sorted and changed at mot time the car handle a bit funny cos i had to wear the new parts in

:)


AdiSRI

posted on 21st Nov 04 at 23:57

lol very true, ifits summat small like that hell do it for nothing anyhoo...


ed

posted on 21st Nov 04 at 21:52

But then you'd get dirty hands :|


myke

posted on 21st Nov 04 at 21:42

quote:
Originally posted by AdiSRI
well i mean it locks on when iu apply the handbrake and leave it for a bit...

sometimes it has to be really banged off using a good bit of throttle...

also the carpulls that way, cud it be siezed?



my calibra used to do this.
i'd recommed you remove the wheel and empty the drum of whatever's in there.
probably loads of dust. they may be cusing it to stick.


ed

posted on 21st Nov 04 at 21:31

Na, it's normal. Mine does it and I know a few people who have had the same problem. Probably something WD40 will solve as it is probably caused by a part rusting - but it's only the handbrake. If it does it all the time though then you have a problem :P


deanmcreynolds26

posted on 21st Nov 04 at 21:03

hynes manual out do it urself


AdiSRI

posted on 21st Nov 04 at 19:35

bugger im gonna get it looked at in service in a couple of weeks but i was hoping to not have a hefty bill.....


deanmcreynolds26

posted on 21st Nov 04 at 19:29

could be the adjuster spring has came off.. common fault either that or it needs replaced...


AdiSRI

posted on 21st Nov 04 at 19:10

well i mean it locks on when iu apply the handbrake and leave it for a bit...

sometimes it has to be really banged off using a good bit of throttle...

also the carpulls that way, cud it be siezed?


Joff

posted on 21st Nov 04 at 19:05

I decided to get my rears looked at while the car was in...

Big old groove in the rear drums and shoes were a tad worn...

I think they were the original 118k items :lol:


Ian

posted on 21st Nov 04 at 19:00

You need to check both really. Could be one isn't doing enough or the other adjusted up too much.


myke

posted on 21st Nov 04 at 18:59

i'd guess that you need to replace the cylinder.

just a guess though.....


AdiSRI

posted on 21st Nov 04 at 18:52

wat can cause this...

its the same side that had a leaking brake line at MOT time...