|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » problems with x16xe » Post Reply
|
LukeGSi |
posted on 13th Nov 04 at 14:05 |
Change the middle sloted rotating clip ring ball bearing and it'll work. | |
Ojc |
posted on 10th Nov 04 at 11:02 |
quote: Fcuk that, its even harder to get to on the Corsa. | |
broster |
posted on 9th Nov 04 at 21:48 |
blame joff for all above comments! cant trust him with a pooter | |
Matt.H |
posted on 9th Nov 04 at 21:07 |
we'll have less of that! | |
broster |
posted on 9th Nov 04 at 20:53 |
quote: But you say "problems with x16xe" X14 is slow | |
topshot_2k |
posted on 9th Nov 04 at 17:37 |
i have velos so had a look and its seems ok to get to, im going to do it this saturday. | |
Joff |
posted on 9th Nov 04 at 17:01 |
quote: I did mine with the Lexmaul inlet in place - removed the header tank though. | |
Joff |
posted on 9th Nov 04 at 17:00 |
Sounds like your whole engine needs replacing. | |
Ojc |
posted on 9th Nov 04 at 16:54 |
Remove inlet manifold on take it off. | |
broster |
posted on 9th Nov 04 at 13:25 |
it is a bitch with the standard inlet but ur throttle body has now been moved so its easy to get at. just get standard carb cleaner mate, comes in a spray can if im not mistaken! | |
topshot_2k |
posted on 9th Nov 04 at 13:21 |
is that all? i heard it was a bitch to do. well ill give it ago, whats the best cleaner to use? i aint got any so have to go to CAS and get some | |
broster |
posted on 9th Nov 04 at 13:09 |
u have the velos inlet? if so then its easy to get to, its a small black cylinder attached to the throttle body with 2 screws, remove it and spray it with carb cleaner, just keep cleaning it till it looks all nice. then refit | |
topshot_2k |
posted on 9th Nov 04 at 13:07 |
got this sat off so want to clean the ICV because i thinks it causing my ecu to flash and it idles erratcly when its warm. does any one have any pictures/tips/things to look out for when cleaning it?? or should i buy a new one? |