|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Metal polishing... hows it done? » Post Reply
|
Matty L |
posted on 9th Nov 04 at 08:15 |
quote: :!good job | |
Gavin |
posted on 9th Nov 04 at 08:13 |
1st pic - water and loads of rubbing down | |
Ally |
posted on 9th Nov 04 at 08:12 |
Gav! :mad: | |
Ally |
posted on 9th Nov 04 at 08:11 |
oooooohhhh shiney | |
waynep |
posted on 8th Nov 04 at 23:25 |
im guna do this to my strut brace :D | |
Corsa^Dan |
posted on 8th Nov 04 at 23:22 |
har funny matt. its not like u can get the pledge out and spray it on and polish it! | |
Matt H |
posted on 8th Nov 04 at 23:05 |
Metal polishing... hows it done? | |
ed |
posted on 8th Nov 04 at 22:16 |
Sand it down with water and 300 grade wet and dry, move on to 600 grade, then onto 1200 grade, then get the course grade rubbing compound onto it, then go to medium compound and finally buff the fuck outa it with some metal polish or fine rubbing compound. You might want to laquer it too to protect it from oxidation and so you can wax it up. | |
broster |
posted on 8th Nov 04 at 22:16 |
lol, time effort and arm ache! need to rub it down with wet and dry, start with 400 grit work your way to 1500, then get the metal polish out i use peek! then u end up with something like this............. | |
Corsa^Dan |
posted on 8th Nov 04 at 22:09 |
as above! |