|
Greasemonkey
|
posted on 5th Nov 04 at 23:44 |
only thing i can think is, the multi funcional displays do this allot, basically either the plugs come loose out the back of the inner plug comes away from the circuite board inside in that case ya have to sit and solder it back on very carefully i had to do it to mine
|
char_chu
|
posted on 5th Nov 04 at 23:28 |
yep i checked that already, everything seemed fine. where would i need to go to get it fixed and how much would be approx cost?
|
Greasemonkey
|
posted on 5th Nov 04 at 16:28 |
first things first make sure ya dahs light dimmer isnt turned fully down, then if that aint it, remove the steering coloum shroud and check nothings been dislodged, trapped or cut, and repair as necessary
|
char_chu
|
posted on 5th Nov 04 at 15:49 |
i tried changing my dashboard bulbs by taking off the top part behind the steering wheel (where the indictors are). I didnt actually move or touch any of the wires, although i have abit of trouble putting that part back. Later that day, i noticed that the display (clock and temperature) was not working. What can I do?
|