corsasport.co.uk
 

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » radio not working » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Dom

posted on 1st Nov 04 at 13:49

quote:
Originally posted by Richie
errr to get the date to display constantly you need to cut the grey/red wire in your corsa ISO block, not the black/grey.


on my block it was black/grey :| and had another black cable for the power for the booster...maybe mine was special :lol:

but yea, easiest way, would be to disconnect the remote lead from the corsa ISO block (which will give you your MDF back) and then cut the black cable for the booster and wire that to the remote lead (i soldered mine to the base of HUs remote lead bullet connector, so i still can use the bullet connector when i need to) :)
Or you could try and feed it off another power feed - it only requires 12v @500mA (i believe) :)


Richie

posted on 1st Nov 04 at 09:53

errr to get the date to display constantly you need to cut the grey/red wire in your corsa ISO block, not the black/grey.


Robin

posted on 31st Oct 04 at 15:40

so if i disconnect the black/ grey wire, from the display, it'll constantly show the date, and is it possible to use this as another power source for the booster?


Dom

posted on 31st Oct 04 at 15:37

quote:
Originally posted by robmarriott
its just strange that it works in certain parts of the country though, maybe i just need a new car....


:lol::lol:

nah, it be something silly :) like i said, first thing to check is the remote-lead pin in the car ISO block. There should be a black wire and a grey/black wire. The former being the aerial booster power and the latter being the control wire for the MDF display, which you have to disconnect for the display to function properly again (with the date) :)
I would double check that the aerial booster connection is getting power :)

or go with another aerial booster :)


Robin

posted on 31st Oct 04 at 15:34

its just strange that it works in certain parts of the country though, maybe i just need a new car....


Dom

posted on 31st Oct 04 at 15:33

so the aerial socket is in? and the aerial booster is getting power?

only thing i can suggest is to get an aerial booster from halfords that sits in between the aerial socket and you HU's socket and see if that helps :) The one in the aerial could be stuffed :(


Robin

posted on 31st Oct 04 at 15:28

well, i used to have a different sony head unit, with the RCA leads on the passenger side, but i swapped it for one with the RCA leads on drivers side, and now the radio doesnt work, the plug is plugged in, checked today, but it still doesnt work, and i havent changed any of the wiring since the last HU, which did work

any more suggestions?


sim0ng

posted on 31st Oct 04 at 14:56

hmmm.... well I've managed to snap the end off my arial plug that goes into my head unit so :P can't seem to find a cheap and crappy arial to nick the end that I need though :(


Dom

posted on 29th Oct 04 at 22:30

if its a corsa B, then remember that there is an signal booster the base of the aerial which is powered from the remote lead/auto aerial connection (its the black wire in the cars HU block, which is on the same pin as the greay/black wire for the MDF) on your HU. So if you have disconnected your remote lead to that pin, then somehow bodge it so your aerial booster is getting power :thumbs:


kev_corsa

posted on 28th Oct 04 at 15:31

check the ariel connection on the back on your headunit mate - sounds obvious I know, but it might have slipped out :)


Robin

Icon depicting mood of post posted on 28th Oct 04 at 14:57

i have a sony head unit, and the radio reception is shite, but it works in some places, like at silverstone, and in corby, but no-where else, anyone got a way i can fix this, cos its really frustrating...