|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » how do I get the clocks to work now i've changed the tape player over? » Post Reply
|
mjw_2k2 |
posted on 26th Oct 04 at 07:07 |
u can also get aerial connectors from motorworld / halfords etc | |
mjw_2k2 |
posted on 26th Oct 04 at 07:06 |
if you look on the back of the iso block (connected to the car got loadsa wires coming out of it theres 3 blocks ye? larger one on top of two smaller ones, have a look on the power iso that has, black, red, brown wires coming out and there should be in that block a red and grey wire, just cut this and your mfd will show the time and date when your using the headunit | |
godlee |
posted on 25th Oct 04 at 21:02 |
the aerial for the radio isn't plugged in anyway (because the radio shows up by the clock at the top doesn't it) I didn't plug the aerial in because it was a different fitment! | |
John |
posted on 25th Oct 04 at 20:46 |
tape up the automatic aerial pin on the heaadunit or the plug that goes into it. Problem solved and no wire cutting. | |
godlee |
posted on 25th Oct 04 at 20:16 |
their wasn't any grey/red wire I could see? is it def their? | |
James_DT |
posted on 25th Oct 04 at 20:14 |
You cut it, not 'hook it up'. | |
godlee |
posted on 25th Oct 04 at 17:49 |
I've taken out the standard tape player and put another one in but their's suppsoed to be a grey/red wire which I need to hook up to the new tape player for the clocks to work! I can't see it on the loom, is that the right colours? Someone on here's bound to have dun this before surely? Its a P reg 1.2 thing. Any ideas? |