corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » c16xe/x16xe without upper-lower inlet-manifold? » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Greasemonkey

 posted on 11th Oct 04 at 08:42

It will be sat either between the block and inlet trunking of between the plastic water pipe and block, like siberia said just drive it


Siberia

 posted on 10th Oct 04 at 22:31

quote:
Originally posted by Adam_B
its easier than removing the inlet fanimould on my 2 litre :)


i can imagine... i put a c16xe lump in there last week and its tight enough i can imagine a c20xe being tighter again....

@ magic monkey... unless u have have droped the tool into the inlet itsself i wouldnt bother going taking the maanifold off to find it.... just drive the car..... it will soon fall out:)


MoNkEy MaGiC

 posted on 10th Oct 04 at 22:23

the haynes manual says i can undo just the top mounting bracket and pivot the alternator to the side!
maybe i can see were it is then but it really depends how much i can move it?


Adam_B

 posted on 10th Oct 04 at 22:18

its easier than removing the inlet fanimould on my 2 litre :)


Siberia

 posted on 10th Oct 04 at 22:16

quote:
Originally posted by Adam_B
taken the alternator out ?


thats not the most easyest thing to do either :look:


Adam_B

 posted on 10th Oct 04 at 22:15

taken the alternator out ?


MoNkEy MaGiC

 posted on 10th Oct 04 at 22:13

as above need some advice/pics of what the c16xe looks like without the upper and lower inlet manifold on??

as ive dropped a 13mm ratchet tip roughly behind the alternator and its fallen further in so i cant even see it now, but its their somwere under the lower inlet manifold! :(

tried jerking car back n forth to shake it out but no luck!???