|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Throttle Boddies advice for my C20xe Corsa? » Post Reply
|
DP. |
posted on 4th Oct 04 at 19:12 |
Right.... will hopefully get hold of some soon :) Will email QED tomorrow. | |
Joff |
posted on 3rd Oct 04 at 19:49 |
quote: Speak to Proven Products, Jondel or Demon Tweeks, etc and get a Pipercross dome filter and rampipes :) | |
Joff |
posted on 3rd Oct 04 at 19:47 |
quote: Not as cheap as the original price you quoted. The price you quote from Rally Nuts wasn't including VAT. When I added to the cart, it calculated the total price including postage. | |
AJBek |
posted on 3rd Oct 04 at 18:27 |
What do you lads reckon to Jenvey 45mm tapers with 40mm trumpets, will the fit. Will be on an angled manifold and they are quite a bit more compact than the3 parallels. | |
starkie |
posted on 3rd Oct 04 at 17:26 |
quote: not as cheap as who? | |
James R |
posted on 3rd Oct 04 at 16:01 |
A "good" 20XE on TB's with ARP's and std exhaust manifold is about 190-200 and abotu 170-175lbs of torque. But you'll need to chose a ecu to run it all. I use emerald, but most like MBE or DTA | |
DP. |
posted on 3rd Oct 04 at 15:19 |
right ok cheers... not too bad then :) I just need to decide whether to fit them myself or see if I can find someone I can pay to do it for me. | |
James R |
posted on 3rd Oct 04 at 11:33 |
You have to order the Bodies from QED as they are the only ppl to sell them, it's £560 I think,(includes fuel rail, throttle linkage) then you need air filter (proven products £75, 50mm high dome type) and 40mm trumpets from jenvey as QED came out pretty expensive for those other bits when we asked. | |
Joff |
posted on 3rd Oct 04 at 10:40 |
quote: Total including VAT & UK Delivery: £57.58 Not as cheap, but still cheaper than most places! | |
starkie |
posted on 3rd Oct 04 at 10:23 |
sorry are infact £42.50 plus vat etc here is the link http://www.rallynuts.com/motorsport/Vauxhall_2.0XE_16v_1753/ARP_Conrod_Bolts_1819.asp | |
DP. |
posted on 3rd Oct 04 at 10:12 |
cheers guys but what about the throttle bodies themselves? and any ideas for fitting? | |
miles |
posted on 3rd Oct 04 at 08:53 |
Rally Design = £55 + vat and post, £71 all in. | |
starkie |
posted on 3rd Oct 04 at 08:16 |
rally nuts £45 plus vat and postage way cheaper than anyone else | |
Joff |
posted on 2nd Oct 04 at 22:35 |
Do Raldes include VAT & postage? | |
miles |
posted on 2nd Oct 04 at 22:12 |
You can get them for £6 more than that from Rally Design, assuming no one else bids. | |
Joff |
posted on 2nd Oct 04 at 19:25 |
DP. |
posted on 2nd Oct 04 at 17:33 |
right ok... well sounds like i need to get some direct to head throttle bodies and some arp bolts. Any reccommendations on where to get these from? | |
James R |
posted on 2nd Oct 04 at 13:47 |
What I mean is you can rev to 8k (near enough) with ARP's in, so you can hold gears a lot longer, otherwsie you spend all the itme changing gear rather than being in gear. if you get me now. | |
miles |
posted on 2nd Oct 04 at 09:59 |
He means that if you dont fit the bolts you cant rev it as high else it will break... | |
AK |
posted on 2nd Oct 04 at 09:24 |
you loose accel if you dont put arp rod bolts in ???? :lol: | |
James R |
posted on 1st Oct 04 at 21:54 |
When I was looking at fitting TB's to a mates 20XE corsa I thought jenvey parallels wouldn't fit in, and went for QED DTH bodies which fit a treat with 40mm trumpets on. ARP's defo need to be fitted aswell because the power goes on past 7k so you loose accel if you don't put them in. good luck. | |
DP. |
posted on 1st Oct 04 at 21:42 |
yea I have heard that about velos :( but there must be someone or somewhere else surely? | |
miles |
posted on 1st Oct 04 at 21:09 |
I assume the DTA isn't the ignition system and that it can control the fueling as well. | |
DP. |
posted on 1st Oct 04 at 20:17 |
Im getting a bit bored of my C20xe corsa now and figure its time to fit some throttle bodies :D |