|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » how to do the timing » Post Reply
|
AdamF |
posted on 15th Sep 04 at 19:10 |
as for the timing line the bottom pulley with the pin on the block and the cams with the marks on the rocker cover | |
AdamF |
posted on 15th Sep 04 at 19:09 |
dont tighten the cam caps down one at a time do every bolt a bit at a time or you will snap the caps | |
myke |
posted on 15th Sep 04 at 19:03 |
:wave: | |
Adam_B |
posted on 15th Sep 04 at 18:50 |
http://www.migweb.co.uk/forums/showthread.php?t=144991&highlight=cambelt+timing | |
myke |
posted on 15th Sep 04 at 18:32 |
cam bearing caps should be tightened in order like head bolts. | |
miles |
posted on 15th Sep 04 at 10:02 |
Put cylinder 1 at tdc. | |
astravanman |
posted on 15th Sep 04 at 06:39 |
ok i got a xe corsa i have taken the head off and the cams out but when i put the cams back in the pistons r pushed down how can i stop this hapening and what is the best way to do the timing thanxs |