|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » 5 stud??? » Post Reply
|
myke |
posted on 2nd Sep 04 at 23:02 |
if he's going the cheap route, (hassle as i've found out this week), then i guess cav or cally turbo or v6 hubs could be used to machine down to corsa bearings instead of just gsi/gte ones. | |
deanmcreynolds26 |
posted on 2nd Sep 04 at 22:52 |
hes running a 2litre corsa so would prob be matching driveshafts to the watever hubs he gets.. | |
myke |
posted on 2nd Sep 04 at 22:45 |
and the hub is the insert bit as you describe. | |
myke |
posted on 2nd Sep 04 at 22:43 |
quote: the splines on the inside of the 5stud hub wont match the splines on your corsa driveshaft. would be far simpler to have the corsa hubs re-drilled and tapped to 5 x whatever mm pcd. | |
Joff |
posted on 2nd Sep 04 at 22:36 |
quote: Sarcasm?? I've got a 5-stud rear beam for sale... :boggle: | |
aceman |
posted on 2nd Sep 04 at 22:01 |
if anyone has pressed corsa bearings they will notice it is in 3 parts the hub the bearing and the insert [with the wheel nut holes in it] can you take the part with the wheel nuts and press them to a corsa bearing or to a vectra bearing then fit either to the corsa hub | |
ainsley_brader |
posted on 2nd Sep 04 at 21:35 |
Ifs thats sarcasm some people notice the little things! | |
Joff |
posted on 2nd Sep 04 at 21:33 |
Sounds like you need a piece of 5-stud flava | |
ed |
posted on 2nd Sep 04 at 21:15 |
Cos I'm always :! at cars with 5 stud wheels. | |
ainsley_brader |
posted on 2nd Sep 04 at 20:49 |
more choice of wheels, cheaper v6 brake discs, looks! | |
Adam_B |
posted on 2nd Sep 04 at 17:53 |
whats the point? | |
ainsley_brader |
posted on 2nd Sep 04 at 17:45 |
no you would need to machine them down as i dont think any of the small blocks came with 5 stud! | |
Robin |
posted on 2nd Sep 04 at 14:32 |
what? | |
aceman |
posted on 2nd Sep 04 at 13:05 |
when fitting 5 studd do 5 stud hub's from say a vectra press in to a corsa bearing then obvisly [spelling's a joke] the bearing in to standered corsa running gear with the 5 stud drive shaft to fit??? |