corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Removing rear drum ? » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Adam-D

 posted on 30th Aug 04 at 06:07

yes you will need a new split pin and the castle nut just undos with a big spannar
split pin and motor store should carry em

why you taking drum off?


Gazz

 posted on 29th Aug 04 at 22:19

And will I need to get a new split pin ? And where from ?


Gazz

 posted on 29th Aug 04 at 22:14

How do I remove the castle nut ?


ed

 posted on 29th Aug 04 at 21:53

Remove the wheel.
Remove the dust cap from the center of the drum.
Undo the Castle Nut on the stub axle.
Pull drum off.
Clean the brake dust off with a wire brush if you need to.
Do not paint the drum red or any other colour.
Re-fit.


Gazz

 posted on 29th Aug 04 at 21:47

Someone give me a step by step guide on how to do this please, and would a wire brush be suitable for getting out all the brake dust ?

Thanks...