|
broster
|
posted on 28th Aug 04 at 21:08 |
quote: Originally posted by CorsAsh
quote: Originally posted by broster
quote: Originally posted by Joff
Replace bushes with Powerflex while you're there ;)
agree powerflex bushes help under brakeing loads esp with bigger brakes and remove knocking noises unless your joff and you end up making the noises worse, donkey
[Edited on 28-08-2004 by broster]
:lol:
exactly what he looks like, freaky
|
CorsAsh
|
posted on 28th Aug 04 at 21:00 |
quote: Originally posted by broster
quote: Originally posted by Joff
Replace bushes with Powerflex while you're there ;)
agree powerflex bushes help under brakeing loads esp with bigger brakes and remove knocking noises unless your joff and you end up making the noises worse, donkey
[Edited on 28-08-2004 by broster]
:lol:
|
broster
|
posted on 28th Aug 04 at 20:56 |
quote: Originally posted by Joff
Replace bushes with Powerflex while you're there ;)
agree powerflex bushes help under brakeing loads esp with bigger brakes and remove knocking noises unless your joff and you end up making the noises worse, donkey
[Edited on 28-08-2004 by broster]
|
mike_1.2LS96
|
posted on 28th Aug 04 at 20:56 |
When i did mine i didnt take the driveshafts out of the gearbox :o
It was tricky to say the least. But we removed one of the tie rods to make room.
You are best off removing the radiator totally - two bolts is all that holds it in place... Cos they are well easy to damage.
|
myke
|
posted on 28th Aug 04 at 20:46 |
great. cheers.
may as well drop the whole lot though if the mount and bush have to be dropped just too get the bar out of the bush.
|
Joff
|
posted on 28th Aug 04 at 11:08 |
Three long bolts holding the tie bar mount to the bodywork bar then one nut holding the tie bar into the mount.
Replace bushes with Powerflex while you're there ;)
|
Kris TD
|
posted on 28th Aug 04 at 09:09 |
arb is only 8 nuts, a 5 minute job max.
|
myke
|
posted on 28th Aug 04 at 08:44 |
think it's gotta come out before the new engine can be positioned anyway?
|
broster
|
posted on 28th Aug 04 at 08:42 |
ARB is easy to remove anyway, when u look under there ull see how easy it is!
|
Adam-D
|
posted on 28th Aug 04 at 08:38 |
no i left that in too.
|
myke
|
posted on 28th Aug 04 at 08:37 |
ok, cheers adam.
that should save a bit of faffing around.
the ARB definately has to come off of the tie bars though yeah?
|
Adam-D
|
posted on 28th Aug 04 at 08:34 |
no they dont have to come out
i dropped my engine and gearbox out and fitted a engine and gearbox
throu the bottom
one was a 8v other was 16v
but take the rad fan off i broke mine lol
|
myke
|
posted on 28th Aug 04 at 08:31 |
in the middle of dropping the engine from my gsi.
had a look last night at the tie bars which haynes says need to come out.
i'm not entirely convinced that they do, but if so, is it best to get the bolt off the end and withdraw it from the bush, or remove the bush holder and bar all together as one unit?
if it's the first option, what size nut is it at the end of the bar? i jump between 19mm and 24mm, and i think it's between theres somewhere. no room to get an adjustable in or even a ring spanner.
any guidance or advice gratefully recieved
|