|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » sub box size's **also port sizes please help** » Post Reply
|
langey |
posted on 11th Aug 04 at 10:18 |
right the box is sorted for size's, the inside of the boxwill be 4.005 cubic feet. pritty close to what i was aiming for (4) | |
langey |
posted on 10th Aug 04 at 14:15 |
right i dont understand this, any ice peeps understand it?? | |
langey |
posted on 9th Aug 04 at 10:12 |
well maybe io have worked it out wrong bacuse the onl;y thing i could see on the site was a chart thingy where you put in a HxWxD and it then works out your cubic feet. so i had to keep changing it to get as close to 4 as possable. | |
Daniel_Corsa |
posted on 8th Aug 04 at 23:09 |
if you want to put an angle on it mate, | |
Dom |
posted on 8th Aug 04 at 20:52 |
quote: so that 508x508x558.8 in mm, which is a pretty small box mate, considering its a 15" sub :) I take that was ported? if it was sealed i would have thought it would have been bigger lol eitherway, its not too bad and will fit into a corsa. Just remember, thats a square box, not an angled jobby, so it wont press up against the back of the rear seats :( | |
langey |
posted on 8th Aug 04 at 19:50 |
right i got onto the site, and used a calculator, and apparantly it works out and the box has to be (HxWxD) is 20x20x22 thats inches too :! | |
langey |
posted on 8th Aug 04 at 15:24 |
only getting the 1 15" sub. power aint serious stuff but it is only 500rms. | |
Dom |
posted on 8th Aug 04 at 15:15 |
quote: u have 15s dont ya? personally i would use 1" stuff, just because i would know that it would last etc :thumbs: plus if you pushing some serious power, then it will withstand the air pressure etc :) as for sizes, yea, look up a sub box calculator and note down what info its ask, then just email audiobahn and ask for that info on the sud model you brought/getting, then just entering it and it will give you sizes :) | |
langey |
posted on 8th Aug 04 at 15:09 |
and that will give me, the sizes of what to build it and that? | |
Dom |
posted on 8th Aug 04 at 15:07 |
quote: cheers, i thought it was quite good myself, hence why i chose it :thumbs: but seriously, contact audiobahn via email etc if you cant view pdf's, then it would be the easiest way. Just say that you cant view pdf files as adobe reader doesnt agree with your pc, please can you send *info required here*.....etc etc then hunt down a box calc via google and type the info in etc :thumbs: | |
langey |
posted on 8th Aug 04 at 14:43 |
love the avator :thumbs: | |
Dom |
posted on 8th Aug 04 at 13:31 |
phone up the supplier you brought the subs from and ask if they can tell you, or email/contact audiobahn, explain that your pc doesnt like pdf files and if it would be possible that they tell you the required information :thumbs: | |
langey |
posted on 8th Aug 04 at 11:43 |
right i'm gonna make my own box for my audiobahn sub. |