Corsa Sport - for Vauxhall and Opel Corsa B, Corsa C and Corsa D

Not logged in [Login - Register]

You Are Not Registered Or Not Logged In

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Spraying door cards??? » Post Reply

Who Can Post?

All users can post new topics and all users can reply.

Icon:

Formatting Mode:
Normal
Advanced
Help

Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On

Post Options:

Disable smileys?
Turn BBCode off?
Receive email notification of new replies?


koolkorsa	posted on 27th Jul 04 at 11:53
	Personally i don't see the point in sanding down or filling to get a smooth finish. Just use normal primer and spray over the original texture. Still gives a good finish and mantains a more factory supplied look.
Davidp18	posted on 27th Jul 04 at 11:14
	ive never understood the filler primer stuff so all u gotta do is put down plastic primer then filler rimer and spray colour over the top?:boggle:
mike_1.2LS96	posted on 26th Jul 04 at 22:29
	my bad english
smack	posted on 26th Jul 04 at 22:27
	o right, got you. thanks for the help :thumbs:
ed	posted on 26th Jul 04 at 22:25
	No no no no... The can is blue and silver, the filler primer will probably be yellow, which will be fine under black...
smack	posted on 26th Jul 04 at 22:09
	ok, iv used a white primer base so is it ok to go over in silver?. I have Black as the colure im having them.
mike_1.2LS96	posted on 26th Jul 04 at 22:06
	Its £10 for a large can. Its blue and silver and not halfords brand. Good stuff.
smack	posted on 26th Jul 04 at 22:04
	ok thanks for the help. I take it i can get this from somewere like Halfords?, And is it much ? :)
mike_1.2LS96	posted on 26th Jul 04 at 22:02
	Yeah filler primer works a treat. Make sure put down plastic primer base first, so the filler has something to cling to, otherwise it will peel off.
MC Kustoms	posted on 26th Jul 04 at 21:55
	use filler primer this will cover up the origanal patten
smack	posted on 26th Jul 04 at 21:54
	I have taken off my door card(the bit with the speaker thing on) and have tryed to sand it down. I have then sprayed it with the primer and that is done. But i can still see the origanal patteny thing on it. Is this ok and can i go ahead and spray it in colour now?? Please help as i dont no much about this. Thanks :thumbs: