Corsa Sport - for Vauxhall and Opel Corsa B, Corsa C and Corsa D

Not logged in [Login - Register]

You Are Not Registered Or Not Logged In

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » C16xe owners please look in » Post Reply


Adam-D	posted on 25th Jul 04 at 20:13
	i have a spare cas sensor if you need one
ainsley_brader	posted on 25th Jul 04 at 19:52
	Well i decided to just fit it and see what diagnostics said. Just had the cambelt to do first. To do the cambelt you have to unplug the cam sensor and having fiddled about under the inlet manifold i realised that it wasnt actuall plugged in, oops, as it disappeared through the manifold i assumed it hadnt been unplugged my mistake. I also noticed while doing the cambelt that the bracket for the crank sensor was broke so that was lucky and is now replaced. So in essence it was the cam sensor! The engines now all in except i'm waiting for throttle cable so havent put the wiring through into the car yet. Ains btw thanks everyone for there help
miles	posted on 25th Jul 04 at 18:33
	Do all the other sensors have plugs in them?
ainsley_brader	posted on 25th Jul 04 at 11:16
	Hope this works. Its the one on my finger
ainsley_brader	posted on 25th Jul 04 at 11:00
	Right its not icv, just been across and looked. The three wires are brown yellow and black! I have a picture of the offending plug if anyone can host it for me!
Adam-D	posted on 25th Jul 04 at 09:47
	yes lots look here http://www.corsasport.co.uk/board/garage.php?action=usergarage&owner=Joff&carid=1278
ainsley_brader	posted on 25th Jul 04 at 09:08
	anyone got a picture of the location of the icv on a c16xe?
Fraser Young	posted on 24th Jul 04 at 23:35
	Nice looking engine though :look: lol
Adam-D	posted on 24th Jul 04 at 18:10
	will be icv
ainsley_brader	posted on 24th Jul 04 at 17:11
	could be either tbh. Not lambda crank, cam, dispac, it is coming out near the header tank.
miles	posted on 24th Jul 04 at 17:05
	No map sensor if it has a afm (C16). I think the icv is 4 pin. Does it look like it plugs into a sensor or could be be for an extension wire to join to? (eg crank, cam, knock, lambda sensor?)
ainsley_brader	posted on 24th Jul 04 at 16:45
	nope straight flat three
miles	posted on 24th Jul 04 at 16:44
	It is the charcol canister. 3 pin plug, is it a straight 3 or a triangle? I think the tps is a triangle 3....
ainsley_brader	posted on 24th Jul 04 at 16:41
	nope wrong end of the engine, its where the map sensor is on the 1.4 but the 1.6 doesnt have map does it?
Adam-D	posted on 24th Jul 04 at 16:35
	yep that pipe ties in there somwhere if i was standing there id fit it str8 away no probs the 3 pin plug hmm is it for the air flow meter? by per chance
ainsley_brader	posted on 24th Jul 04 at 16:29
	Thank yep theres two earth straps there on the loom bolting onto the alternator bracket and 1 the other end bolts to the inlet manifold, where that second one bolts up there is also a 3 pin plug coming out of the loom its that that i dont know where it goes. Vacuum pipe on the c16xe just goes straight from manifold to servo nothing tees off on it. I'm thinking that other one could possibly be charcoal canister??
Adam-D	posted on 24th Jul 04 at 16:17
	earth strap goes onto the inlet manifold where the alternator bolts up the plug the other one goes onto the vacumm pipe i think
ainsley_brader	posted on 24th Jul 04 at 14:13
	quote: Originally posted by Fwaza esquire Just to the right of the engine cover you can just see a blue and red plug on a little air solenoid with two pipes come of it, one goes into the inlet manifold where does the other go? Also at the back of the manifold right hand side there is a earth strap coming out of the loom and coming out the otther side the loom in the same place is a 3 pin plug, where does this go? Thanks Ainsley