|
|
|
Not logged in [Login - Register] |
 |
You Are Not Registered Or Not Logged In |
|  |
|
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » rear disks » Post Reply
|
| CorsAsh |
posted on 23rd Jul 04 at 19:21 |
Independant Rear Suspension | |
| AdamF |
posted on 23rd Jul 04 at 18:20 |
whats irs kris? | |
| Kris TD |
posted on 23rd Jul 04 at 17:03 |
basically if you want too use cav ones you cant use them from a gsi, turbo or v6 as these have IRS | |
| M2RTY |
posted on 23rd Jul 04 at 11:16 |
yeah ones without IRS | |
| ed |
posted on 23rd Jul 04 at 11:07 |
That tutorial on Mig uses Cav disks... | |
| M2RTY |
posted on 23rd Jul 04 at 11:00 |
cav ones dont fit due to IRS i heard a few times | |
| ed |
posted on 23rd Jul 04 at 10:29 |
You don't need any form of kit, just an Astra or Cav rear beam, welder, drill and a grinder.... | |
| Greasemonkey |
posted on 23rd Jul 04 at 10:14 |
what happens if ya have abs already?? | |
| corsaandy |
posted on 23rd Jul 04 at 10:08 |
not if you dont use the abs i used astra gte rear disks for mine and you can just take the abs hb out and not use it | |
| AdamF |
posted on 23rd Jul 04 at 06:06 |
is more work as they had abs, you will need to make the hole in the centre of the spacer plate bigger so the abs hub will fit on | |
| mike16v |
posted on 22nd Jul 04 at 22:18 |
they can be used, u can get hold of a conversion kit which provides adaptor plates that will allow the setup to be bolted on to ure rear axle, or u can also weld up the holes on ure hubs and have them re-drilled to take the new stud pattern | |
| dantheman |
posted on 22nd Jul 04 at 21:58 |
could i use the rear disk setup of cav gsi for convertin my corsa?? and wat else wud i need: calipers, disks and hubs? |