:thumbs:

Just watch the glass - get a mate to hold the glass up while you get busy with the rivit gun :)

i just did this last week, with thanks to mav 3000's guide, i didnt even bother with my haynes manual.

I was lucky enough to have the loom already in the car, so that cut down on a lot of time. The first door i did took most of a day cos i had to re do it, the second i knew what i was doing and had it done in 2 hours.

give ya self a day dude

how long does it take to swap the manual windows to the electric windows?i have all the necessary components to go in the door and have the wiring to do this!just how long does it take?

your gonna need, window switches, motor-mechanism, wiring looms and plenty of time :lol:....

the wiring "loom" and "swithces" dont have to be for a CORSA...BUT u WILL have difficulties fitting them if their not... as i did :mad:

i had THIRD party motors, switches and wiring loom installed...i then after a year fitted the "standard" CORSA switches with blue leds myself...and wat a mess the wiring was! it was it over the place! the switches took 6 wires each were as the wiring loom in my car only had 5 wires per switch!!

good thing im a electrical genius :D hours of soldiering and rewiring and it was done and fully operational :)

its funny the amount of time and work you can do on such a samll thing and nobody really knows it when they get in the car...all they see is a damn window switch that opens the window!! :lol:

im pretty sure the mk2 astra windows fit as well, im sure my uncle fitted them in his 2.0 corsa!

Yesh I did it Lukey so I'm sure you can :thumbs:

looms can also be lifted from a astra F.

the mechanisms need to be CORSA.

quote:

---

Originally posted by Mav 3000
You have to use CORSA parts - not Cav, Veccy, Calibra, Nova, Astra, Frontera - k :)

The motor is spring loaded onto the regulator - you need both bits as a whole - these will only fit from a matching car.

You will need the Door looms, switches, switch holders and a car loom if your unlucky enough to have the wiring as standard. See my tutorial to check for this.

---

God bless you my son :thumbs:

You have to use CORSA parts - not Cav, Veccy, Calibra, Nova, Astra, Frontera - k :)

The motor is spring loaded onto the regulator - you need both bits as a whole - these will only fit from a matching car.

You will need the Door looms, switches, switch holders and a car loom if your unlucky enough to have the wiring as standard. See my tutorial to check for this.

and you'll need a body loom from a car that has them to, as your has a crap lom as standard

Would i be able to use motors ect from veccy CDX?

First of all you need another Corsa, not a Cav, then you need my Tutorial on it (guess where you can find that :))

Hey ... If I had a car that has eletric windows like a caviler or something, what parts would I need off of it to convert my Corsa B 1999 Sxi to have electric windows as I could really do with them!!!

Are there any guides to doing this conversion too?

Cheers...

Paul J