The wiring appears to be fine ( Is this a common fault on corsa b's btw cos my m8s isn't working either? ) I've got a positive voltage up until the plug that is inside the dash. It's the plug that supplies the power and signals to the clocks but i can't find any problems at all with it. The only thing odd (other than the light not coming on) is that if i hav the indicator on so that the green flashing light is on then push my hazard switch the flashing light stops. Cheers for the help ppl

it could be the wire, on the left indicator stalk its one of the three BLACK/WHITE wires, cant remember which one tho mate:thumbs:

oh right though u meant the one in the hazard switch itself. I'd get you haynes out and have a look at the wiring diag and check all the connections are right etc. I'd start with the ones only associated with the hazards cause if the light is working with norm indicatos then doubt there'll be a prob with that part of the circuit

The bulb works cos it comes on with the indicators. Plus me and my grandad did the open circut test with the ammeter

u def the bulb still working? How you tested it?

Alrite, for all those who read my other post i've now fixed the problem with the indicator light not displaying ( It turned out to b on of the connections behind where the clocks sit being too low to make contact :mad: ) Anyway i've now got another prob.

When my hazards are on the lights on the car flash but the one on the dash doesn't, it neva has tho and my mates corsa b doesn't work either. I've checked with an ammeter and i hav a voltage at the connector block and obviously the bulb still works. Does anyone know what this could be? I bloody hate car electrics. Cheers